Quick Guide
StraightShaper (Router mode)/FairRouter
1. Connect the StraightShaper between your Router and Switch
- StraightShaper WAN port → internet router’s LAN port
- StraightShaper LAN port → company network switch. Use straight (gray) Ethernet cables
- After connecting the FairRouter, turn the power on
2. Check the LED Indicators
- Power:
ON - LAN and WAN ports ON = OK /
OFF = No Connection. Use a crossed (red) Ethernet cable instead - STATUS: ON = starting up (5 minutes max.)
Blinking green = OK / 
Blinking red = Problem detected
3. Open the Web GUI
- Open the Web GUI from a PC in your company network